12ft / 3.5m Daiwa Rod (Inter-IL-Seaflex-64-80-350) - 71% HVF Carbon, made in Japan
Brand new 3.5 meters Daiwa InterLine rod
IL Seaflex 64 80-350 is superior to bite, Muchingu action
stickiness, flexibility and tenacity to live. Reel seat adopts the
V grip sheet easier to fatigue
grip. Tip adopted a strong inner diameter 3.0mm type also in trouble on the right stop and dust clogging.
Interline (medium through) the tangle to the guide, to eliminate the trouble of Sabiki such as multi-point
needle gimmick, to support and provide a comfortable fishing. It is possible to stretch the rod while
setting the hook, make it very useful moving up to get on the boat. Tip can be adopted smooth line release
the linear interline (
spiral structure).
Rod is designed with the latest revolutionary technology utilize the incredible
High volume fibre
carbon, produce a fine diameter blank that resists twisting, eliminating blank stress, creating better
casting accuracy, smoother drag pressure and greater hook setting power. The
latest
Interline technology using guideless blanks allows for longer casts, superior action and the
strength to overtake hard-fighting species. Rod bends evenly, no stress points provides maximum blank
strength, it has 360 degree axially symmetric completely tangle free tip which provides equal performance at
any angle.
Linear Interline guide structure with the line runs inside the blank,
is integrated inside the blank, the blanks true action is optimized, no tangles, no guide breakages, even
line control with convenient no tangling storage.
This is one of the coolest, funkiest and sexiest most technically advanced all-around rod available. 6:4
action combined with the operability and superior sensitivity make this rod suitble for all weather
conditions espeicially windy or rainy, in a wide range of fishing species: targeting Red Sea Bream,
Yellowtail Amberjack, Redfish, Chopper Blues, fishing
Striped Bass off shore,
Largemouth Bass on a lake,
Carp on a ponds,
Northern Pike on a river, fishing
Rainbow Trout,
Steelhead,
Bull Trout on mountain streams,
Salmon, and many other marine and
freshwater game fish.
DAIWA IL SEAFLEX 64 80-350
-
6:4 Medium light action
- Fit clamp size: M
-
High density HVF carbon: 71%
- Telescopic sections: 4
-
Total length: 3.5m / 11.7ft
-
Folded length: 96cm / 3.2ft
-
Total weight: 320g / 11.0oz
-
Tip diameter outer:3.7mm | internal:3.0mm
- Butt diameter: 21.4mm
-
Casting weight: 80-120g / 2.8-4.2oz
-
Drawer TOP-IN interline
-
Through one-shot thread
- V grip sheet
-
Stepping under yarn prevention stopper
-
Removable lightweight resin top guide
-
Soft cotton rod bag and plastic case
Back to top
Line is distributed evenly along the entire spiral structure, decreasing torque, providing smoother
retrieves, friction free casting and ultra smooth drag pressure. Decreasing line contact and drag thus
increasing cast distance and accuracy by drawing water off the line and keeping the line centred in the
rod. By increasing the amount of spirals and deceasing the spiral peak, interline rods have become
inherently more sensitive. The advantage of using this rod is to eliminate the tangles to guide, being
able to have a comfortable fishing with little trouble from the land or from the boat, feel more relaxing.
Back to top
Daiwa rod technology to support the linear interline fishing method in IL Seaflex 64 80-350
Removable top guide.
Removable top guide helps easy to maintenance top guide, to adhere most dirt that difficult to remove,
such as jellyfish, plankton, seaweed, etc...
Entrance [Guide].
When the two guide round attached to the introducing portion functions as entrance guides, oval attached
to the rod body and extended the rod, it functions without damaging the yarns in both waye, when it is
retracted.
Thread Garni prevention under plug.
Under plug which arranged the guide sticks to the bottom of the in the section (section just above the
base rod to go inside when folded pole), together with the yarn Garni prevention mechanism that is
applied to the lower plug further, can shorten pole to prevent yarn folded under stopper was near when
is hurt.
V grip seat.
Reel seat adopts the "V grip sheet" easier to fatigue grip, is located closer to the bottom which makes
the perfect balance. New grip with excellent hold characteristics Pamingu-operability. Hand fishing is
very comfortable.
The Linear Interline structure.
The linear structure refers to the structure material, inner surface becomes spiral. The structure
allows line runs inside the rod blank instead of guideswhich reduce the stickiness. In addition, because
it does not strung film of water between the inside lines and release of smooth yarn is possible.
Decreasing line contact and drag thus increasing cast distance and accuracy by drawing water off the
line and keeping the line centred in the rod.
Easy operation.
The line go inside through the guides located inside the rods. The rods is special designed with carbon
thread inside to make sure the line go smoothly and will not touch the rods side tightly. Ensure the line
will not scratch with the rods. The steel wire is for help the line go inside.
1. Mount reel.
2. One looped side connect with the line and another site insert into the rods guide.
3. Pull wire straight through the tip top and when the fishing line go out of the tip guide
disconnect the line and the wire.
4. Store the wire for future use.
As well as convenience of threading, this is one of the technology of Daiwa can realize the ideal of tone
in a compact put away.
Back to top
Interline Technology
Smooth bending curve - Interline rods bend evenly, no stress points provides maximum blank strength,
unlike guided rods which create an uneven segmented curve with high stress points.
360 degree axially symmetric tip - completely tangle free and provides equal performance at any
angle, standard tip guides tangle easily and to get full performance they must be used at the same direction
as the line.
No external weight - normal guides add weight, thus the action of the blank is degraded, Interlines
guide structure is integrated inside the blank, and no external weight means the blanks true action is
achieved.
Torque free - the line is located inside the blank, no guides to provide torque stress points,
with many contact points torque and friction is reduced, normal external guides create high friction and
torque reducing the life of the blank.
Linear Interline raised spirals - line is distributed evenly along the entire spiral structure,
providing smoother retrieves and ultra smooth drag pressure.
No guides - no tangles, no guide breakages, even line control with convenient no tangling
storage.
Extremely high sensitivity - with up to 200 linear contact points directly onto highly sensitive
carbon, Interlines are inherently more sensitive compared to standard rods, guides are made of materials
that absorb vibration "dulling" line sensitivity.
No slack line - standard guided rods can have up to 30 cm's of slack line due to the segmented guide
distribution whereas interline provides completely even line distribution, even the subtlest of bites are
felt and strikes are instantaneous.
Back to top
- Do not use any substitute materials or wire instead of wire designed to operate with this rod.
- Do not kink, bend abruptly or otherwise abuse the threading wire. It could damage the rod.
- Always use the recommended knots for connecting leaders.
- Do not brush inside; this may damage the inside of the rod.
- Accumulated water can be removed by whipping the rod.
- After use rinse out the inside and exterior of the rod with freshwater and whip the rod to remove
excess water. Allow to dry before storage.
- Do not apply oil or lubricant to the inside of the rod as this will impedeline flow.
- Never lift your catch.
- Always open and close
telescopic rod with a special care.
Back to top
Interline rods are highly suited to braid and PE lines, these lines require monofilament leaders and thus
leader knots. For optimal performance Interline knots require ultra slim knots for easy line flow. Common
leader knots like Twisted Leader Knots and Double Uni's are sufficient but the PE Leader Connection knot
for connecting leaders to braided lines for maximum interline performance is suited best. For maximum knot
strength apply a quick dry super glue to the knot.
Be careful
- Knots are unnecessary and may interfere with smooth threading.
- If resistance occurs do not force through. Simply remove and start again.
- Tip section has small diameter and leader knots can get entrapped inside the blank. For larger
leaders keep the leader knot outside the blank.
- Entrapped knots or line can damage the tip section.
Also recommended with this item:
Back to top